CustomersEquipment
Equipment / The Bridge Hotel
Advanced MxPro 5, 4 loop
Asset · Fire alarm panel · installed 2018
Example business: the parts and history here are made up.
Where it sits
The Bridge Hotel › Advanced MxPro 5, 4 loop
Due in 32 days · last done 20 Jun
Parts and components (0)
Nothing under it yet.
Parts fitted (4)
Standby battery 12V 7AhBAT-12-7 · × 2
Optical smoke detectorSD-OPT · × 112
Manual call pointMCP-RED · × 22
Loop sounderSND-LOOP · × 30
Condition history
17 Nov · good, pass6-monthly fire alarm service · Amira Khan
Faults offered when it fails
Detector did not respond to testReplace the detector head
To priceDetector past its service lifeReplace the detector head
To priceCall point glass or element brokenReplace the call point element
To priceCall point did not trigger the alarmReplace the call point
To priceSounder too quiet or not workingReplace the sounder
To priceBeacon not flashingReplace the visual alarm
To priceStandby batteries failed the load testReplace the standby batteries
To pricePanel showing a fault it will not clearFault-find on the zone and repair
To priceZone plan missing or out of dateDraw and fit a new zone plan
To priceSignal not received at the alarm receiving centreFault-find the signalling unit
To priceManuals and plans
MxPro 5 panel operating manualmanual · Advanced · example
Health 73/100
Good1 open alarm from the kitAbout 8 years old, expected life 15 years
| 2027 | 2028 | 2029 | 2030 | 2031 |
|---|---|---|---|---|
| £0 | £0 | £0 | £0 | £0 |
Readings from the kit
All connected kitbattery voltage27.12V now
Last 14 days · low 27.05V, high 27.34VPanel fault: Device missing, loop 1 address 1417 Nov · advanced · job raised
urgentDisablement: Zone 4 disabled at the panel15 Nov · advanced · office told · seen by Ellie Burke
normalFire signal: Fire signal, zone 2 (changing rooms). Site confirmed steam, false alarm8 Nov · advanced · office told · seen by Ellie Burke
emergencyBack to normal: Panel back to normal8 Nov · advanced
info