CustomersEquipment
Equipment / Oakfield Primary
Kentec Syncro AS
Asset · Fire alarm panel · installed 2014
Example business: the parts and history here are made up.
Where it sits
Oakfield Primary › Kentec Syncro AS
Overdue 8 days · last done 11 May
Parts and components (0)
Nothing under it yet.
Parts fitted (4)
Standby battery 12V 7AhBAT-12-7 · × 2
Optical smoke detectorSD-OPT · × 112
Manual call pointMCP-RED · × 22
Loop sounderSND-LOOP · × 30
Condition history
11 May · good, passLast service · Engineer
Faults offered when it fails
Detector did not respond to testReplace the detector head
To priceDetector past its service lifeReplace the detector head
To priceCall point glass or element brokenReplace the call point element
To priceCall point did not trigger the alarmReplace the call point
To priceSounder too quiet or not workingReplace the sounder
To priceBeacon not flashingReplace the visual alarm
To priceStandby batteries failed the load testReplace the standby batteries
To pricePanel showing a fault it will not clearFault-find on the zone and repair
To priceZone plan missing or out of dateDraw and fit a new zone plan
To priceSignal not received at the alarm receiving centreFault-find the signalling unit
To priceManuals and plans
Syncro AS installation and commissioningmanual · Kentec · example
Health 67/100
Keep an eye on it12 of about 15 years usedAbout 12 years old, expected life 15 years
| 2027 | 2028 | 2029 | 2030 | 2031 |
|---|---|---|---|---|
| £0 | £0 | £6,800replace | £0 | £0 |
Readings from the kit
All connected kitbattery voltage27.25V now
Last 14 days · low 27.05V, high 27.35V