Risk assessment: Electrical workThe hazards, how we control them, the method and the PPE.

What you need to know

From Northside Heating & Electrical's own risk assessment.
Electric shock from live parts: Safe isolation: isolate, lock off, prove dead with a proved tester. Only work live if there is no other way, and never alone
Working at height (ladders, steps): Ladder checked before use, on firm ground, three points of contact. Use a tower or podium for longer work
Asbestos in old boards, ceilings or flash guards: Ask for the asbestos register in buildings built before 2000. Stop and report anything suspect
Dust and debris from drilling or chasing: Dust mask and eye protection. Cover furniture and floors. Hoover as you go
Customers, staff or the public near the work: Tell people before power goes off. Keep the work area clear and never leave a board open
Lifting and carrying kit: Lift with your legs, ask for help with anything heavy or awkward
Step 1: Arrive, introduce yourself and agree with the person in charge what you are doing and when the power goes off
Step 2: Check the area: access, asbestos register, anything unsafe
Step 3: Isolate, lock off and prove dead before touching anything
Step 4: Carry out the work to BS 7671
Step 5: Test before putting the power back on, and record the results
Step 6: Tidy up, show the customer what was done and hand back
PPE: Safety boots, Insulated gloves, Eye protection, Dust mask when drilling
1. Asbestos in old boards, ceilings or flash guards. What's the control?
2. Electric shock from live parts. What's the control?
3. Dust and debris from drilling or chasing. What's the control?
4. Which of these comes first in the method?
5. Which of these is on the PPE list?