CustomersManuals and codes
Manuals and fault codes
What your engineers can open on their phone on site: manuals and drawings per type of kit, make or site, and fault codes by make.
Example business: these documents and codes are examples and don't open.
| Make | Code | What it means | What to do | |
|---|---|---|---|---|
| AdvancedMxPro 5 | Earth fault | A cable on a loop or sounder circuit is touching earth | Split the loop at the panel and test each leg to earth | |
| AdvancedMxPro 5 | Battery fault | Standby batteries low, missing or past their life | Load test the batteries and check the date code | |
| AdvancedMxPro 5 | Loop open circuit | The loop is broken, the panel is driving it from both ends | Find the break between the last device that reports and the next | |
| KentecSyncro AS | Device missing | A loop address is not answering | Check the head is seated and the address matches the panel | |
| KentecSyncro AS | Charger fault | The battery charger output is out of range | Check the mains supply and the charger fuse | |
| myenergizappi | PEN fault | Open-PEN protection has tripped: supply voltage out of range | Measure the supply at the cut-out and tell the DNO if it stays out of range | |
| myenergizappi | RCD fault | The charger saw DC leakage or a residual current | Test the RCD, unplug the car and retry | |
| Worcester BoschGreenstar | EA 227 | No flame detected (ignition failure) | Check the gas supply, ignition electrode and condensate trap | |
| VaillantecoTEC | F28 | Ignition failure on start up | Check the gas supply, electrode and gas valve | |
| VaillantecoTEC | F22 | Low water pressure | Repressurise to 1.5 bar and look for a leak |