CustomersConnected kit
New job
Equipment / Connected kit

Connected kit

Readings and alarms from equipment that report in, and fire panel events. Each one raises a job or tells the office, by your rules.

Example business: these readings and alarms are made up.
9Equipment reporting in
2To look at
2Jobs raised
1Fire signals

Kit makers

Daikin OnectaHeat pumps and air conditioning: room, outdoor, flow and tank temperatures and error codes, every 15 minutes.
Ready to connectNeeds Agentryx to switch it on
Mitsubishi Electric MELCloudEcodan heat pumps and air conditioning: flow temperatures and error codes.
Ready to connectNeeds Agentryx to switch it on
Vaillant myVAILLANT ProBoilers and aroTHERM heat pumps: pressure, faults and service warnings.
Ready to connectNeeds Agentryx to switch it on
Worcester Bosch HomeCom ProGreenstar boilers: pressure, fault codes and burner hours.
Ready to connectNeeds Agentryx to switch it on
myenergizappi chargers and eddi: status, temperature and faults.
Ready to connectNeeds Agentryx to switch it on
Any gateway or BMS (MQTT or HTTP)Anything that can post JSON sends readings straight to /api/v1/telemetry with an API key. Works today.
Works today

Fire panels

Advanced remote panel accessMxPro panels: fire, fault and disablement events as they happen.
Ready to connectNeeds Agentryx to switch it on
Gent by Honeywell remoteVigilon panels: events and device faults.
Ready to connectNeeds Agentryx to switch it on
Kentec remote monitoringSyncro panels: fire, fault and disablement events.
Ready to connectNeeds Agentryx to switch it on
Hochiki remoteLatitude panels: events and device faults.
Ready to connectNeeds Agentryx to switch it on
SIA DC-09 receiver (signalling units and ARCs)Any panel with an IP signalling unit, through a DC-09 receiver that posts to us.
Ready to connectNeeds Agentryx to switch it on

Send readings yourself

Any gateway, BMS or panel interface that can post JSON works today. Make an API key with write access on Connections, then put each equipment's device id on its page (or send our id or its serial).

POST /api/v1/telemetry
Authorization: Bearer agx_...
{
  "asset": "HP-0381127",            // our asset id, its serial, or its device id
  "source": "daikin",
  "readings": [{ "metric": "flow_temp", "value": 22.5, "unit": "C" }],
  "alarms": [{ "code": "U4", "text": "Comms fault", "severity": "major" }],
  "panel": [{ "type": "fault", "zone": "4", "device": "SD 14", "text": "Device missing" }]
}

Equipment reporting in (9)

Hamworthy Wessex ModuMax (plant room)Device id HAM-982027
Advanced MxPro 5, 4 loopDevice id ADV-337265
Kentec Syncro ASDevice id KEN-914884
Worcester Bosch Greenstar 4000Device id WOR-471551
Baxi 800 Combi 2Device id BAX-149170
Vaillant ecoTEC plus 835Device id VAI-580754
Ideal Vogue Max C32Device id IDE-258373
Mitsubishi Ecodan 8.5kWDevice id MIT-325516
Potterton Promax Combi 28Device id POT-970278